Sounds good, I’ll get it wrapped up and boxed up nice and get a shipping cost for you. US Postal is typically the lowest compared to UPS. Is PayPal ok once we get a total decided ?
The center grill should be same condition, I’ll get it down and send pics.
Appreciate it! I usually use UPS, and can send you a label if you can give me weight and dimensions.
I cleaned up the center grill, here’s the pics, don’t know what happened to the mercury medallion. I think I have room in the box if you want. There is a little pitting on the bottom right chrome but very little. I’ll throw it in for $45, total $130 + shipping. let me know.
Deal. Let me know how you’d like to be paid. And box dimension and weight if you want me to send a label. Thanks! Feel free to PM me the details.
PayPal is the easiest. I’ll get you weight and dimensions tomorrow with details
(not sure how, PM?)
Interested in the front bumper, how much do you want for it? I need core to get a re-chromed bumper.
Thanks!
I sent you a PM.
I have it with me today was planning to take it into UPS store to get weight and shipping cost. I need to weigh it anyway…
If you can get me your zip code I’ll get shipping cost then you can use your label or whatever works best. Please let me know oyur zip code.
thanks
My zip code is 28211. I get discounted rates through my UPS account, so sending a label is no problem.
I don’t have a scale and I go passed UPS so I let them do their thing:
37 x 19 x 13", 23 lbs ($69.38)
I have access to a label printer that’s about right for UPS labels 4x6 I think so lets try that. You can PayPal me for the parts and email me the label. here’s my info:
Jeff Hilliard
jhhome@wowway.com
Thanks
Just paid. I sent you an email asking for your “from” address so I can plug it into the system.
Sold the front bumper couple weeks ago, also door edge trim and headlight /center grill.
More parts from the same car: Gas fill door (small crack in red lens) $35, wiper arms $30ea. $50 for both, washer reservoir $25, headlight door actuator assembly $45, new in box upper control arm shaft and hardware kit (qty 2) $40 for both. prices negotiable, buyer pays shipping nothing extra added on.
I’m looking for a good pair of shock towers. Is this a San Jose built car? the second digit in the VIN would be an R. I’m in Ohio and in driving distance to pick up the parts. Also looking for a good deck lid, etc.
Its a F Dearborn car. The shock towers have big ugly holes from a cutting torch, someone thought it was a good idea in order to grease the upper arm pivot. The deck lid is in good condition, was professionally rustproofed at some point (see the yellow plugs). the inside surfaces were sprayed with black rustproofing, not undercoating. I hit a spot with the sander years ago I think there was a bubble in the paint I don’t remember for sure.
I have parts that are too difficult for me to ship. If your car has factory exhaust manifolds I have a complete dual exhaust including manifolds, from manifolds back, H pipe, mufflers, tail pipes very few miles on the new exhaust when I pulled the engine etc.
Good hood, disc brake spindles, calipers, disc brake pedal. new in box coil springs, driver door good condition, drive shaft, FMX trans, ok radiator, rough gas tank, one fender solid the other has rust holes. If you were to travel here for the deck lid for example, I’d definitely be willing to bundle some of these other items and make it worth the trip.
FYI That is actually a 1970 deck lid. Note the 2 D shaped holes on the underside toward the rear. That is for mounting the Eliminator deck spoiler. 69s did not have that. Works just fine on a 69. If you were close, I’d be over to buy it. It is a very nice part.