Aftermarket Steering Wheel

Looking for a good choice for a aftermarket steering wheel. Anybody got some suggestions and pictures?

If you add the details about your car we can give better advice. The year does matter.

Sorry, I totally spaced out. 1968 Cougar base, however upgrading to XR7 dash.

Are you wanting more of a stock appearing wheel? there are some cool reproduction wheels out there that look cool and fit the appearance of a stock interior. Even wood grain to match the Xr7 dash panel.

Or are you wanting to upgrade and have a more modern feeling wheel? Maybe change the diameter to a little smaller?

DieselD,
Still undecided. Would like to see some pictures showing how it would look.

Well, if you want a cool vintage look, the wheel that came in 1967 Shelby Mustangs was also offered in the “How To Sharpen A Cougar’s Claws” brochure.

It is essentially the Shelby wheel with a Cougar decal in the hub.

There are nice reproduction '67 Shelby steering wheels available but they are pricey.

Philip, I don’t think that steering wheel fits a 1968 Cougar steering column. Would it require an adapter?

Steven

Good question Steven, I’ve never done it so I can’t say for sure.

I’m sure some sort of an adaptor and modifications would be needed, but I would think it is possible since it was meant for a '67 steering column.

I’ve seen '67 steering wheels on '68s but I don’t know if that requires switching out the entire column?

  • Phillip

I’ve got a stock 67 wheel on my 68. I posted a “how to” on it a few years ago— I’ll see if I can find it.


Here it is: https://cccforum.discoursehosting.net/t/67-steering-wheel-on-68-tilt/3841/1

This is what I have on my car but I’m undecided if I want to keep it. It was on the car when I got it but it’s a nice wheel, billet alum, leather wrapped and made in USA. I originally wanted to go down to a 14” wheel for easier access since it’s a fixed column but since I got my seats installed they are lower then stock so the 15” wheel isn’t too bad now.



Remember you would need a hub adaptor along with the wheel.

Thanks guys! Really like the Shelby. Keep the pictures coming.

Found this on eBay. Scroll down and see a few other choices.

https://www.ebay.com/i/202413145298?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=202413145298&targetid=935431406293&device=m&mktype=pla&googleloc=9022759&poi=&campaignid=10897976532&mkgroupid=108153392340&rlsatarget=aud-622524042678:pla-935431406293&abcId=9300403&merchantid=113794775&gclid=Cj0KCQiAnb79BRDgARIsAOVbhRqgC7uCoY9-CRDQZEG2IVlnJ-iSv-2hhRs2EfMzFufT4BtRq-ACmNYaAm8rEALw_wcB

I chose this wheel, as I wanted something that looked aftermarket/custom but not too crazy (wheel is made by Forever Sharp). I’m not sure if I’m going to keep the burlwood wrap or not I have a different wood wrap with rivets also. I added the cat to the center to finish it off.