Any source for original type Black Vinyl weave material?

Cougar Community Classic Cougar Paint and Body
1

I need to address some rust bubbles under the vinyl roof on my 71 xr7, so the original vinyl needs to come off. Am looking for the original type material for the roof.
Would anyone know if a similar material is available?

Also, when i go to remove the chrome trims, is there any tricks or tips i need to be made aware.

Are most of the side chrome just " clipped " on . I had a look and can see the retaining nuts for the rear quarter trim pieces.

Cheers
Ken

242301993_970689830144364_5031116578448553758_n.jpg
242301993_970689830144364_5031116578448553758_n.jpg645×860 64.5 KB

242125514_864213777560445_6625214711260596947_n.jpg
242125514_864213777560445_6625214711260596947_n.jpg645×860 66.8 KB

242072016_833516293996750_8587969588559749049_n.jpg
242072016_833516293996750_8587969588559749049_n.jpg645×860 96.8 KB

242555157_1954636258032115_2461770483145582303_n.jpg
242555157_1954636258032115_2461770483145582303_n.jpg645×860 75.9 KB

242082553_914638759475995_6859570352009197911_n.jpg
242082553_914638759475995_6859570352009197911_n.jpg645×860 78.4 KB

2

Ken, here is a pic of one of my donor quarters. You’ll see 6 holes which have studs coming thru so you’ll need to remove the nuts from behind. Pretty sure the rest use the plastic clips. Top looks non- original… should be pebble grain? WCCC should have it. You’re really opening up a can of worms there!
Jim

EF61B1E5-46BB-4B40-A3BA-726FCAEC446D.jpeg
EF61B1E5-46BB-4B40-A3BA-726FCAEC446D.jpeg800×600 139 KB