Here’s a shot of the RestoMod.
https://cccforum.discoursehosting.net/t/how-low/9585/4
It has the following:
Drop-in plates under the A-arms welded.
Shock tower reinforcements were heated & pressed to the tower wall & welded.
Welding as per the Boss 302 chassis mod book & then some…
Shelby drop
Moog spring w/ 1 1/4 coil cut
Roller spring perches
Upper A-arm were heated & bent for ball joint angle correcton & then a reinforcing plate was welded to the undersides
70 big bearing spindles had bumpsteer correction. Heated tie rod end on each spindle & corrected. Then sent out for heat treating & inspection
Reinforced crossmember
Xport brace
Koni shocks
Traction master bars
9" 4:11